|
|
| |
 |
|
|
Lux SAE 10W-40, API SJ/CF |
|
Prize winner of th All-Russian Program–Contest "100 best products of
Russia" in 1999.
Semisynthetic and mineral multigrade all-season oils of European
quality.
They are designed for lubricating heavy duty modern and advanced
domestic and imported gasoline and diesel turbo-supercharged
engines,operating at temperature from –40°C to +50°C.
*Prevent losses of oil for burn-off and provide an excellent
protection against any deposits, corrosion, scuffing, oxidation.
*Resistant to aging and prolong the interval between oil
replacements.
Tested and approved by "Mercedes-Benz" (Sheet 229.1).
Licensed by American Petroleum Institute (API)*;license No.1121.
The oils are certified by Gosstandart (State Committee for
Standards) of Russia.
The oils warrant easy start-up and excellent pumpability in strong
frosts and reliable operation in hot weather due to their good
viscosity-temperature characteristics.
|
|
Specification |
Characteristic |
|
12.5-16.3 |
Kinematic Viscosity at 40 0C, mm2/s |
| 125 |
Viscosity Index, min. |
| 200 |
Flash Point in open cup, 0C, min. |
| -35 |
Pour Point, 0C, max. |
| 10W-40 |
SAE viscosity class |
| SJ/CF
A3-98 B3-98 |
API operation class |
| 7.5 |
Base Number, mg KOH/g of oil, min |
| 1.2 |
Sulfate Ash Content, %, max |
|
| |
| Synthetic SAE 5W-40,
API SJ/CF |
|
Prize winner of the All-Russian Program –Contest "100 best products
of Russia"
in 2000. The first entirely synthetic multigrade all-season high
quality oil in Russia.
It is used for lubricating heavy duty gasoline and diesel engines of
a new generation at environmental temperature from –40°C to +50°C.
*It saves fuel
*Prolongs the interval between oil replacements.
*Meets the most stringent requirements of European and US motor-car
construction and the environment.
Tested and approved by "Mercedes-Benz" (Sheet 229.3),BMW -LongLife
oil (LL);
"Volkswagen" VW-Norm 502 00 and 505 00; Porsche.
Licensed by American Petroleum Institute (API): license No.1121.
Certified by Gosstandart (State Committee for Standards) of Russia.
|
|
Specification |
Characteristic |
|
12.5-16.3 |
Kinematic Viscosity at 40 0C, mm2/s |
| 140 |
Viscosity Index, min. |
| 200 |
Flash Point in open cup, 0C, min. |
| -40 |
Pour Point, 0C, max. |
| TU 0253
-093-00148 636-97 |
Specification |
| 5W-40 |
SAE viscosity class |
| SJ/CF |
API operation class |
| 7.5 |
Base Number, mg KOH/g of oil, min |
| 1.3 |
Sulfate Ash Content, %, max |
|
0.26/0.11 |
Fraction of active components Ca/Zn,%, min |
|
| |
| Synthetic SAE 5W-40,
API SJ/CF |
|
Prize winner of the All-Russian Program –Contest "100 best products
of Russia"
in 2000. The first entirely synthetic multigrade all-season high
quality oil in Russia.
It is used for lubricating heavy duty gasoline and diesel engines of
a new generation at environmental temperature from –40°C to +50°C.
*It saves fuel
*Prolongs the interval between oil replacements.
*Meets the most stringent requirements of European and US motor-car
construction and the environment.
Tested and approved by "Mercedes-Benz" (Sheet 229.3),BMW -LongLife
oil (LL);
"Volkswagen" VW-Norm 502 00 and 505 00; Porsche.
Licensed by American Petroleum Institute (API): license No.1121.
Certified by Gosstandart (State Committee for Standards) of Russia.
|
|
Specification |
Characteristic |
|
12.5-16.3 |
Kinematic Viscosity at 40 0C, mm2/s |
| 140 |
Viscosity Index, min. |
| 200 |
Flash Point in open cup, 0C, min. |
| -40 |
Pour Point, 0C, max. |
| TU 0253
-093-00148 636-97 |
Specification |
| 5W-40 |
SAE viscosity class |
| SJ/CF |
API operation class |
| 7.5 |
Base Number, mg KOH/g of oil, min |
| 1.3 |
Sulfate Ash Content, %, max |
|
0.26/0.11 |
Fraction of active components Ca/Zn,%, min |
|
| |
| -Super SAE 5W-40, API SG/CD |
Mineral and semisynthetic based multigrade all-season oils with the
use of multifunctional imported packages of additives are designed
for domestic and foreign highly augmented naturally aspirated
automotive diesel engines and highly augmented gasoline engines of
cars,trucks and minibuses.
*The oils provide for an easy start-up at low temperatures and
prevent carbonization, when high-sulfur fuel is used.
*They possess high anticorrosive properties with respect to
non-ferrous metals and neutralizing ability relative to acids,formed
during engine use.
*High thermal oxidative stability and resistance to foaming warrant
a long run between oil replacements under hard operating conditions.
They were tested by the "AVTOVAZ" JSC.
The oils were certified by Gosstandart of Russia.
|
|
Specification |
Characteristic |
|
10.5-16.3 |
Kinematic Viscosity at 40 0C, mm2/s |
| 135 |
Viscosity Index, min. |
| 200 |
Flash Point in open cup, 0C, min. |
| -35 |
Pour Point, 0C, max. |
| 5W-40 |
SAE viscosity class |
| SG/CD |
API operation class |
| 6 |
Base Number, mg KOH/g of oil, min |
| 1.3 |
Sulfate Ash Content, %, max |
|
0.06/0.10 |
Fraction of active components Ca/Zn,%, min |
|
Diesel Engine Oil
M-10DM |
Seasonal mineral oils with compositions of high quality additives.
M-8DM is a winter oil,M-10DM – summer oil. They are designed for
lubricating domestic highly augmented turbo-supercharged diesel
heavy duty engines (quarry dump trucks, dozers,heavy industrial
tractors, heavy trucks of the KamAZ type, road trains, prime movers,
city and intercity buses) and medium augmented moderately
supercharged diesel engines.
*The oils have a large margin of alkalinity, thus providing an
excellent washing and neutralizing ability during the entire
operation, and promote a reliable protection against carbonization.
*They possess improved antiwear and anticorrosive properties as well
as high thermal oxidative stability.
*Characterized by stability to foaming and warrant excellent
lubrication of parts.
*Ensure a long run between oil replacements.
Tested by the "KamAZ" Open Joint Stock Company and “Avtodizel” Open
Joint Stock Company.
Certified by Gosstandart of Russia.
|
|
Specification |
Characteristic |
| 11.4,
min |
Kinematic Viscosity at 40 0C, mm2/s |
| 90 |
Viscosity Index, min. |
| 220 |
Flash Point in open cup, 0C, min. |
| -18 |
Pour Point, 0C, max. |
| 30 |
SAE viscosity class |
| CD |
API operation class |
| 8.2 |
Base Number, mg KOH/g of oil, min |
| 1.5 |
Sulfate Ash Content, %, max |
| 0.15 /
0.14 |
Fraction of active components Ca/Zn,%, min |
|
| |
|
Back |
|
|
|
