|
|
 |
|
Industrial Oil IGP-18 |
|
Specification |
Characteristic |
|
90 |
Viscosity Index, min. |
| 1 |
Total Acid Number, mg KOH/g of oil, max |
| 0.2 |
Ash Content, %, max. |
| 180 |
Flash Point in open cup, 0C, min. |
|
1 |
Sulphur Content, %, max. |
| -15 |
Pour Point, 0C, max. |
|
3 |
Color on colorimeter CNT, CNT unit, max. |
| 24-30 |
Kinematic Viscosity at 40 0C, mm2/s |
| 0.04 |
Zn weight fraction,%,max. |
|
Industrial Oil IGP-30 |
|
Specification |
Characteristic |
|
90 |
Viscosity Index, min. |
| 1 |
Total Acid Number, mg KOH/g of oil, max |
|
0.2 |
Ash Content, %, max. |
| 200 |
.Flash Point in open cup, 0C, min |
|
1 |
Sulphur Content, %, max. |
| 15- |
Pour Point, 0C, max. |
|
3.5 |
Color on colorimeter CNT, CNT unit, max. |
| 50-39 |
Kinematic Viscosity at 40 0C, mm2/s |
| 0.04 |
Zn weight fraction,%,max. |
|
Industrial Oil IGP-38 |
|
Specification |
Characteristic |
|
90 |
Viscosity Index, min. |
| 1 |
Total Acid Number, mg KOH/g of oil, max |
|
0.2 |
Ash Content, %, max. |
| 210 |
Flash Point in open cup, 0C, min. |
|
1 |
Sulphur Content, %, max. |
| 15- |
Pour Point, 0C, max. |
|
4 |
Color on colorimeter CNT, CNT unit, max. |
| 65-55 |
Kinematic Viscosity at 40 0C, mm2/s |
| 0.04 |
Zn weight fraction,%,max. |
|
Industrial Oil IGP- 49 |
|
Specification |
Characteristic |
|
90 |
Viscosity Index, min. |
| 1 |
Total Acid Number, mg KOH/g of oil, max |
|
0.2 |
Ash Content, %, max. |
| 215 |
Flash Point in open cup, 0C, min. |
|
1 |
Sulphur Content, %, max. |
| 15- |
Pour Point, 0C, max. |
|
5 |
Color on colorimeter CNT, CNT unit, max. |
| 85-76 |
Kinematic Viscosity at 40 0C, mm2/s |
| 0.04 |
Zn weight fraction,%,max. |
|
Industrial Oil IGP-72 |
|
Specification |
Characteristic |
|
85 |
Viscosity Index, min. |
| 1 |
Total Acid Number, mg KOH/g of oil, max |
|
0.2 |
Ash Content, %, max. |
| 220 |
Flash Point in open cup, 0C, min. |
|
1 |
Sulphur Content, %, max. |
| 15- |
Pour Point, 0C, max. |
|
5.5 |
Color on colorimeter CNT, CNT unit, max. |
| 125-110 |
Kinematic Viscosity at 40 0C, mm2/s |
| 0.04 |
Zn weight fraction,%,max. |
|
Industrial Oil IGP-91 |
|
Specification |
Characteristic |
|
85 |
Viscosity Index, min. |
| 1 |
Total Acid Number, mg KOH/g of oil, max |
|
0.2 |
Ash Content, %, max. |
| 225 |
Flash Point in open cup, 0C, min. |
|
1 |
Sulphur Content, %, max. |
| 15- |
Pour Point, 0C, max. |
| |
Color on colorimeter CNT, CNT unit, max. |
| 165-148 |
Kinematic Viscosity at 40 0C, mm2/s |
| 0.04 |
Zn weight fraction,%,max. |
|
Industrial Oil IGP-114 |
|
Specification |
Characteristic |
|
85 |
Viscosity Index, min. |
| 1 |
Total Acid Number, mg KOH/g of oil, max |
|
0.2 |
Ash Content, %, max. |
| 230 |
Flash Point in open cup, 0C, min. |
|
1 |
Sulphur Content, %, max. |
| 15- |
Pour Point, 0C, max. |
| |
Color on colorimeter CNT, CNT unit, max. |
| 205-186 |
Kinematic Viscosity at 40 0C, mm2/s |
| 0.04 |
Zn weight fraction,%,max. |
|
Industrial Oil I-20A |
|
Mineral oils of fine selective treatment without additives.
They are used in machinery and mechanisms of industrial
equipment,where the operating conditions impose no requirements for
antioxidant and anticorrosive properties of oils, and as hydraulic
fluids.
They are noted for high stability to oxidation and have good
demulsifying properties.
Efficient at a temperature from –5°C to +70°C in continuous
operation. |
|
Specification |
Characteristic |
| 0.03 |
Total Acid Number, mg KOH/g of oil, max |
|
0.005 |
Ash Content, %, max. |
| 180 |
Flash Point in open cup, 0C, min. |
| 1 |
Sulphur Content, %, max. |
| -15 |
Pour Point, 0C, max. |
| 3 |
Color on colorimeter CNT, CNT unit, max. |
|
25.0-35.0 / 29-35 |
Kinematic Viscosity at 40 0C, mm2/s |
|
Industrial Oil I-40A |
|
Mineral oils of fine selective treatment without additives.
They are used in machinery and mechanisms of industrial equipment,
where the operating conditions impose no requirements for
antioxidant and anticorrosive properties of oils, and as hydraulic
fluids.
They are noted for high stability to oxidation and have good
demulsifying properties.
Efficient at a temperature from –5°C to +70°C in continuous
operation. |
|
Specification |
Characteristic |
| 0.05 |
Total Acid Number, mg KOH/g of oil, max |
|
0.005 |
Ash Content, %, max. |
|
200 |
Flash Point in open cup, 0C, min. |
| 1.1 |
Sulphur Content, %, max. |
| -15 |
Pour Point, 0C, max. |
| 4.5 |
Color on colorimeter CNT, CNT unit, max. |
| 51-75 /
61-75 |
Kinematic Viscosity at 40 0C, mm2/s |
|
Industrial Oil I-50A |
|
Mineral oils of fine selective treatment without additives.
They are used in machinery and mechanisms of industrial
equipment,where the operating conditions impose no requirements for
antioxidant and anticorrosive properties of oils, and as hydraulic
fluids.
They are noted for high stability to oxidation and have good
demulsifying properties.
Efficient at a temperature from –5°C to +70°C in continuous
operation. |
|
Specification |
Characteristic |
| 0.05 |
Total Acid Number, mg KOH/g of oil, max |
|
0.005 |
Ash Content, %, max. |
|
215 |
Flash Point in open cup, 0C, min. |
| 1.1 |
Sulphur Content, %, max. |
| -15 |
Pour Point, 0C, max. |
| 6.5 |
Color on colorimeter CNT, CNT unit, max. |
| 90-110 |
Kinematic Viscosity at 40 0C, mm2/s |
|
|
|
