|
|
|
MC-20
|
|
Mineral oil without selective treatment additives.
The oil is permitted for use in aircraft piston engines of planes,
gas turbine engines,reduction gears of helicopters and axial joints
of propeller
hubs in "MI"helicopters. |
|
Specification |
Characteristic |
| 20.5 |
Kinematic Viscosity at 100 0C, mm2/s |
| 80 |
Viscosity Index, min. |
| 0.29 |
Cokeability, %, max. |
| 0.03 |
Total Acid Number, mg KOH/g of oil, max |
| 0.005 |
Ash Content, %, max. |
| 265 |
Flash Point in open cup, 0C, min. |
| -18 |
Pour Point, 0C, max. |
|
-AZh
|
|
Low solidification mineral oils with a composition of domestic
additives.
This fluid is designed for shock absorbers and telescopic struts in
motorcar industry. |
|
Specification |
Characteristic |
| 120 |
Viscosity Index, min. |
| 140 |
Flash Point in open cup, 0C, min. |
| -50 |
Pour Point, 0C, max. |
| 12 |
Kinematic Viscosity at 50 0C, mm2/s |
| 800 |
Kinematic Viscosity at -20 0C, mm2/s |
|
Tp-30
|
|
The oil is designed for lubricating
and cooling the bearings of various turbo units:
steam and gas turbines, hydraulic turbines, turbocompressors
as well as for work in control systems as a hydraulic fluid.
This oil can be used as a working fluid in control systems of
turbine units and in circulation and hydraulic systems of various
industrial
mechanisms. Certified by Gosstandart of Russia.
*It is noted for high stability to oxidation and protection of
metals from corrosion.
*Suppresses foaming.
*Has good demulsifying ability. |
|
Specification |
Characteristic |
| 95 |
Viscosity Index, min. |
| 0.5 at
most |
Total Acid Number, mg KOH/g of oil, max |
| 190 |
Flash Point in open cup, 0C, min. |
| -10 |
Pour Point, 0C, max. |
| 0.8 |
Sulfur wt. fraction, %, max. |
| 3 |
Color on colorimeter CNT, CNT unit, max. |
|
41.4-50.6 |
Kinematic Viscosity at 40°C, mm2/s |
| -18 |
Demulsifying time,min, max. |
|
Tp-22C
(grade 1) |
|
The oil is designed for lubricating and cooling the
bearings of various turbo units:
steam and gas turbines, hydraulic turbines, turbocompressors
as well as for work in control systems as a hydraulic fluid.
This oil can be used as a working fluid in control systems of
turbine units and in circulation and hydraulic systems of various
industrial
mechanisms.
*It is noted for high stability to oxidation and protection of
metals from corrosion.
*Suppresses foaming.
*Has good demulsifying ability.
Certified by Gosstandart of Russia. |
|
Specification |
Characteristic |
| 95 |
Viscosity Index, min. |
|
0.04-0.07 |
Total Acid Number, mg KOH/g of oil, max |
| 186 |
Flash Point in open cup, 0C, min. |
| -15 |
Pour Point, 0C, max. |
| 0.5 |
Sulfur wt. fraction, %, max. |
| 1.5 |
Color on colorimeter CNT, CNT unit, max. |
|
28.8-35.2/20-23 |
Kinematic Viscosity at 40°C, mm2/s |
| 3 |
Demulsifying time,min, max. |
|
|
|
